Phosphate Remover

Phosphate Remover

What is the proper way to use phosphate / silicate remover?.?

I have a problem with brown algae growing in my tank and I was reading on the Web view it and says if I put in the silicate remover would help end the brown algae. So I put in about a quarter cup (it is said to use a cup for every 75 gallons) and is said to leave it in the filter for four days and then off. What if I just left the phosphate remover the filter. I have a Fluval 205 and 26 gallon tank. I'm using a product called her maid by Seachem PhosGuard is that a good product or products are best?.

how its just right to put in a place that will have a good flow through it, that is why they suggest a filter in the salt water reactors use it falling to improve contacts, to the extent that leaves you may work for more than four days, but if you go for a long time will be more saturated and liberation of phosphate and silicate back into the water causing algae blooms and other Seachem it works well i use phosguard

Phos – guard Phosphate Remover 20 Liter (Catalog Category: Aquarium / Filter Media) Phos – guard Phosphate Remover 20 Liter. DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250 mL (~1?cup) for every 300 L (75 gallons*). Leave product in place for 4 days, then test ph…